Volume : 4, Issue : 4, APR 2018
IE3D DESIGN OFDOUBLE– C SHAPED SLOTTED PATCH ANTENNA FOR WI-MAX APPLICATIONS
KOMAL M. MASAL, SANTOSH D. KALE
Abstract
WiMax (Worldwide Interoperability for Microwave access) has been established by the IEEE 802.16 working group. WiMax
antennas have high interest in recent years. Researchers are focusing on how to design antennas for WiMax technology. WiMax
has three allocated frequency bands. The low band (2. 5-2.69 GHz), the middle band (3.2-3.8 GHz) and the upper band (5.2- 5.8
GHz). WiMax theoretically can have coverage of up to 50 km radius. Due to its advantages such as low-cost, small size low
weight and capability to integrate with Microwave integrated circuits, the microstrip patch antenna is a very good candidate for
integrations in applications such as wireless communication systems, mobile phones and laptops. In this paper Two C-slot
microstrip antenna is designed and simulated for the WiMax frequency range of 3.2-3.8 GHz. The antenna is fed by Inset feeding
technique. The antenna is designed using FR4 as dielectric substrate.The characterization result of return loss, Voltage Standing
Wave Ratio are presented consecutively. From the result, it shows that the proposed antenna has the return loss of 36.43dB that
corresponds to VSWR of 1.03 at center frequency of 3.5 GHz.The antenna Extensively simulated on IE3D simulation software.
Keywords
Microstrip patch antenna, Inset Feeding, IE3D Simulation software, Bandwidth, Return loss.
Article : Download PDF
Cite This Article
Article No : 10
Number of Downloads : 1135
References
1. TliliBoutheina,”Design of double C-slot microstrip patch antenna for WiMax application”, in Proc.IEEE.2010 2. TliliBoutheina,”Design of C-slot microstrip patch antenna for WiMax application”, in Proc.IEEE.2009 3. Broadband Microstrip Antenna By Girishkumar, K.P.Ray 4. C.A.Balanis, “Antenna Theory analysis and Design”, Third Edition, 5. P. Pigin, “Emerging mobile WiMax antenna technologies”, IET Communication Engineer, 2006. 6. C. T. Lee and K.L Wong,“Uniplanar printed coupled-fed PIFA with a band- notching slit for WLAN/WiMAX operation, IEEE APS, vol. 57, pp. 1252-1258, April 2009. 7. C.Y Pan, T. S Horng, W. S Chen and C.H Huang, “Dual wideband Printed Monopole Antenna for WLAN/ WiMax Applications”, IEEE Antenna and Wireless Propagation, 2007.