Volume : 9, Issue : 6, JUN 2023

NATIONAL CONFERENCE ON INNOVATIONS IN COMPUTING TECHNOLOGIES (NCICT'23)

PASSWORD-BASED CIRCUIT BREAKER

DR. YUVARAJU M, KABILAN D, GOKUL D, VINIL H, REVANTH SRIRAM D

Abstract

The project is about password-based circuit breakers. It is most helpful for the field assistant, who will work under 230 volts. This can be controlled by the microcontroller by using the password programmed in the microcontroller. The major electrical accident that happened to the field assistant was caused by a lack of communication between the electrical substation and the field assistant staff. The power from the transformer (on or off) can be controlled by the field assistant by using a password. If the fault occurs in the transmission line or in the transmission pole, the field assistant should arrive at the particular transformer and cut off the supply by entering the password and comfortably mending the fault in the line. After mending the fault in the line by re-entering the password, the supply will flow continuously to the load. The system originated with four outputs and four different passwords. At apiece, all outputs are connected to the relay and are used to fragment the supply to the loads. At present, the demo piece is made with four loads, each controlled independently.

Article : Download PDF

Cite This Article

-

Article No : 4

Number of Downloads : 622

References

1. Electric Line Man Safety using Micro Controller IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 01, 2016

2. “The Microcontroller and Embedded systems” by Muhammad Ali Mazidi and Janice Gillispie Mazidi, Pearson Education.

3. Kumar, Jay, et al. "Password Based Circuit Breaker.” International Journal of Recent Research Aspects 1 (2016): 80-88.

4. M.G. Hudedmani, N. Ummannavar, M.D. Mudaliyar, C. Sooji, &M. Bogar. “Password Based Distribution Panel and Circuit Breaker Operation for the safety of Linemen during Maintenance Work,” Adv. J. Grad. Res., vol.1, no.1, pp. 35-39, 2017.